![]() ![]() There are two text entry boxes that require input, the Station Callsign and the Frequency box. DVAPTool will start and display a dialog window similar to the picture below. To start using the DV Access Point Dongle, double click on the DVAPTool icon on your desktop. You can walk away from the PC/Mac now since all control commands are issued from your D-STAR radio. ![]() Note that playback is done only to your radio, not to a connected gateway or reflector. While playing back, you can click the "Skip to next keyup" to skip to the next person talking. You may record and playback conversations by clicking the "Record" and "Playback" buttons. Set the Power level slider to maximum (10dBm or 10mW) and set the Squelch level slider to half way between your current noise level (the red bars below the slider) and the max level (similar to the pic above). Check your Internet connection and try again. ![]() If DVAPTool has problems connecting to the server, a message box will pop up letting you know that there was a problem. If it does not, you may need to select a different device in the DVAP Device box.ĭVAPTool then makes a request to an Internet based D-STAR gateway name server. Once the DV Access Point Dongle is opened, the Device Name and Serial Number fields should show data specific to the hardware you have opened. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |